No – Because of the way satellite modems are configured, the LNK WiFi Module is not compatible.
Is the LNK WiFi Module compatible with Satellite-based ISPs?
Can I extend the range of the LNK Module’s AP Hotspot without using a local WiFi network?
Yes – You can boost the signal of the LNK WiFi Module’s Hotspot to extend its range using a commercially available WiFi signal boosters that operates on 802.11 b/g/n 2.4GHz signals. Simply configure your WiFi signal booster to connect to the Rain Bird wireless network while the LNK is in AP Hotspot mode as an unsecured […]
I’m a contractor who would like to manage controllers for my customers. How can I do it?
If you are an Irrigation Contractor you have the option to set up your customer’s LNK WiFi Modules on your device: On your company phone or tablet, you can provision the LNK WiFi Module directly to your customer’s WiFi network using your device, then provide an invitation to your customer to connect to the LNK […]
How do I back up and restore my Rain Bird App so I don’t lose my settings and connected irrigation controller(s)?
You can back up your Rain Bird app, controllers, and settings to Apple iCloud and Google Cloud. iOS: Settings-> Select Apple ID -> iCloud -> iCloud Backup (On) Android: Settings -> Backups (name may vary on different devices) -> Backup (On) (or) Drive (Google Drive App) -> Backups -> <Select device from list> -> Gear/Settings Icon […]
Is the LNK WiFi Module EPA WaterSense Certified?
Yes, the LNK WiFi Module is EPA Water Sense Certified when used with qualifying controllers. Please check Rainbird.com for all compatible EPA WaterSense certified controllers.
Why did my controller water after we had a big rainstorm if I have a LNK Module and/or a rain sensor connected?
Your LNK makes daily watering adjustments but does not prevent scheduled watering events, and it may take more than 24 hours for the seasonal adjustment values to reflect actual rainfall. Your rain sensor does not prevent irrigation after a heavy rainfall, it could be that (1) Your rain sensor may be in an area where […]
Can I use a rain sensor with my WiFi controller with the LNK installed?
Yes. All Rain Bird WiFi enabled controllers have terminals for a rain sensor. Remove the yellow jumper wire from the terminals marked “SENS”. Connect both rain sensor wires to the rain sensor terminals per the rain sensor installation instructions.
If the power goes out do I lose the schedule on my controller?
No, Rain Bird controllers contain a non-volatile memory inside the controller that keeps programming without the need for a battery backup.
Why does my system still water even after turning the controller off?
If your controller is off and the water keeps running there is an issue with 1 or all the valves. When this happens it may be necessary to clean or replace a valve, or to call a contractor. For assistance in getting a contractor referral please call: 1-800-RainBird.
Why is my controller not watering the run times I set the zones for?
This issue is likely caused by the seasonal adjust setting. Double check the setting in the App or at the controller. If the seasonal adjust is less than nominal, the run times will be shortened accordingly.